The Robot Body Makers Are Still Losing Money. The Parts Suppliers Are Not

In the rush to build humanoid robots, the first companies making money are not the ones building the robots.

A robotic gripper reaching toward a human hand
Electric grippers and dexterous hands have become a profitable layer of the robot supply chain (Source: OFweek)

Commerce Ministry data shows sales of embodied-intelligence robots on major platforms rose 22.6 per cent year on year in the first three quarters, and jumped 130 per cent over the National Day holiday. That consumer excitement is only the surface. The money is moving deeper into the supply chain.

China Securities Journal argues that investment is shifting from complete machines to core components, control platforms and data infrastructure. According to IT Orange, China saw 322 embodied-intelligence deals worth RMB 93.5 billion in the first half of 2026, roughly five times more than a year earlier. Valuations are rising faster than revenue, putting the sector between hype and disillusionment.

The shovel sellers

Unitree, the most profitable body maker, reported third-quarter revenue of RMB 665 million, up 69.93 per cent, but total profit fell 27.78 per cent to RMB 112 million. UBTech posted first-half revenue of RMB 1.269 billion, up 104.2 per cent, and still lost RMB 339 million. Dobot’s first-half loss widened about 163.8 per cent to RMB 108 million.

Suppliers are running at full capacity. Leadshine reported first-three-quarter revenue of RMB 1.909 billion, up 46.77 per cent, and net profit of RMB 299 million, up 86.80 per cent, with third-quarter profit growth of 156.1 per cent. Zhongda Leader posted third-quarter revenue of RMB 336 million, up 34.90 per cent, and deducted profit of RMB 18.92 million, up 170.62 per cent. Henggong Precision’s embodied-robot revenue reached RMB 173 million, up 1,173.73 per cent.

The economics are structural. Reducers account for 15 to 20 per cent of a robot’s bill of materials, servo systems and motors another 15 to 20 per cent, and dexterous hands about 18 per cent. Together they are more than half the cost. A Tesla Optimus needs 14 to 20 reducers, 14 to 16 planetary roller screws and roughly 17 to 20 coreless motors.

Why the shovel sells first

Whoever wins, whether Unitree, AgiBot or UBTech, still has to buy joints, screws, reducers and sensors. These parts have technical barriers and tight capacity, giving suppliers pricing power. Control platforms add a second layer: moving from selling single motors to selling joint modules and hands carries a much better margin.

Data infrastructure is the third layer, and the gap is large. The China Academy of Information and Communications Technology says the world holds only hundreds of thousands to millions of hours of high-quality real data, against the tens of millions needed for a true breakthrough. Grand View Research puts the global data-collection and labelling market at USD 17.1 billion by 2030. According to IT Orange, 25 Chinese embodied-data startups raised more than RMB 17 billion in the first half of 2026.

But certainty has a shelf life

Supplier orders are an amplified version of downstream confidence. If body makers stall, suppliers feel it first. CAICT reports that more than 60 per cent of robots go to shows, education and exhibitions, that average monthly uptime is under ten days, and that fewer than 20 per cent genuinely work in factories. Several body makers, including DeepBlue and Cloud Minds, have already failed.

Technology risk matters too. A dexterous hand may not be the final answer. Qomolo chief executive Lu Ceuwu argues that a three-finger gripper is a better balance for most high-value tasks, with lower cost and far better stability and data collection. For suppliers, the biggest risk is not having no orders. It is placing orders on a route that changes.

Reducers and servo motors are the safest bets, because joints must turn and motors must fit whatever end-effector wins. Dexterous hands are the uncertain part. And once a body maker reaches scale, it can make key parts in-house, name second-tier suppliers or squeeze prices. Unitree already produces tens of thousands of joint motors and modules a year in-house.

The certainty of the shovel sellers rests on a time difference: the body makers cannot yet make their own shovels economically. That gap will narrow as the industry matures.

Editor’s note: This is an adapted translation of the original OFweek report. It has been trimmed and restructured for readability for an international business audience. The full original (in Chinese) is at https://robot.ofweek.com/2026-11/ART-8321201-12003-30712596.html.

Leave a comment